Set dns server to be the ip address of a dns server Set Radius server 2 to be the ip address of a your secondary radius server (use the same as server 1 or leave the zeros if you only have one) Set Radius server 1 to be the ip address of a your primary radius server

(This setting depends on the hardware and the dd-wrt firmware version.

Your LAN is also protected from your wifi users. If everything works, then simply enable chillispot with the given settings in Administration/Hotspot/ChillispotĮnable 'Separate wifi from the lan bridge': This enable your wired lan to connect directly to the internet without going through chillispot. Disable Encryption for your hotspot users.Ĭheck that you can connect to the internet from your wireless device Once your internet is working, setup your wireless lan. If your existing router address is at same address (192.168.1.x) you must change your router IP (like 192.168.2.1) Should should be able to connect to your router web management ( ) (login: root, password: admin)Ĭheck that you can connect to the internet from your computer. (disable your static ip and let dhcp automaticaly configure your ip) (VERY IMPORTANT as the hotspot doesn't work if internet comes from LAN port)Ĭonnect your computer to one of the LAN ports. If you have questions about flashing you can ask for help in the forum.Ĭonnect the internet (WAN) port to your modem or existing router. Then you must follow the procedure that correspond to your router in the DD-WRT installation page. Make sure you read the precautions for flashing.ĭownload DD-WRT V23SP2 here (DD-WRT V24 may work as well, but there are some reported problems) IMPORTANT: Supported routers with 2Mb flashes can't actually run chillispot, and can't be used for a hotspot. cannot be held responsible to whatever occurs to your router.įirst you have to make sure that your router is supported and has at least 4mb of flash. However, please note that incorrect flashing procedure can brick your router and might void its warranty. It is not the best but it is cheap and widespread.įlashing DD-WRT into your router is an easy task. The most known model is the linksys WRT54GL (the L (Linux) is very important). If you don't have a compatible router, be careful when choosing a compatible model.

There is no restriction about the kind of internet connection, but you must have an ethernet plug to connect. You should consider using the new WorldSpot firmware.įirst, you need an internet connection. If you want to use paypal payment, you can't use DD-WRT, as chillispot had a bug making the use of paypal unreliable. DD-WRT uses an old version of chillispot, the hotspot software.

Dd wrt v24